Jumpstart Installation with out the any files.
1- Load and mount the Solaris 9 CD-ROM on a client on the same subnet,
2- Run the script to copy the CD to disk
on apss8015 server -
# cd /cdrom/cdrom0/s0/Solaris_9/Tools
./setup_install_server /var/tmp/solaris
3- Copy CD #2 to disk --- not required.
# cd /cdrom/cdrom0/Solaris_9/Tools
./add_to_install_server /var/tmp/solaris
# cd /var/tmp/solaris/Solaris_9/Tools
# ./add_install_client -i 10.217.72.55 -e 00:03:ba:3d:70:75 webs8007 sun4u
This command will do a lot of things to your system
- It setups NFS and shares the install dir: /var/tmp/Solaris and read only for everyone.
- enables the tftp protocol on the server and creates /tftpboot, then copy some files to /tftpboot
the /tftpboot now contains several files
apss8015:/tftpboot #ls
0AD94837 rm.10.217.72.55
0AD94837.SUN4U tftpboot
inetboot.SUN4U.Solaris_9-1
apss8015:/tftpboot #
- it updates the file /etc/bootparams
apss8015:/tftpboot #cat /etc/bootparams
webs8007.uhc.com root=apss8015:/var/tmp/solaris/Solaris_9/Tools/Boot install=ap
ss8015:/var/tmp/solaris boottype=:in rootopts=:rsize=32768
apss8015:/tftpboot #
- it starts up some daemons that you may not want to have running all the time
/usr/sbin/in.rarpd -a
/usr/sbin/rpc.bootparamd
and all the NFS stuff.
Then from the ok prompt
On the client
ok> boot net - install
ok boot net - install
Boot device: /pci@1f,0/pci@1,1/network@c,1 File and args: - install
Using Onboard Transceiver - Link Up.
Setting Half duplex mode.
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
Timeout waiting for ARP/RARP packet
29200
Server IP address: 10.217.72.59
Client IP address: 10.217.72.55
Using Onboard Transceiver - Link Up.
Setting Half duplex mode.
Requesting Internet address for 0:3:ba:1f:84:3
SunOS Release 5.9 Version Generic_117171-07 64-bit
Copyright 1983-2003 Sun Microsystems, Inc. All rights reserved.
Use is subject to license terms.
whoami: no domain name
Configuring /dev and /devices
Using RPC Bootparams for network configuration information.
NOTICE: SUNW,qfe3: No response from Ethernet network : Link Down - cable problem?
Skipping interface qfe3
NOTICE: SUNW,qfe2: No response from Ethernet network : Link Down - cable problem?
Skipping interface qfe2
SUNW,qfe1: 100 Mbps half duplex link up - internal transceiver
Skipping interface qfe1
NOTICE: SUNW,qfe0: No response from Ethernet network : Link Down - cable problem?
Skipping interface qfe0
Skipping interface eri1
Configured interface eri0
Searching for configuration file(s)...
Search complete.
Select a Language
0 English
Select a Locale
58 U.S.A (en_US.ISO... )
Networked
[x] yes
Use DHCP
[ ] yes
[x] no
Primary network interface
[x] select the right one (qfe0, hme0, ...)
Host name: yourhost
IP address:
System part of a subnet
[x] yes
Netmask: 255.255.255.0
Enable IPv6
[x] no
Default Route
[x] specify one
Router IP Adress:
Confirm Information
...
Configure Kerberos Security
[x] no
Time Zone
[x]
Date and Time
Year
month
day
hour
minute
select initial install
select standard install
select geographic regions
[/]
Select 64 Bit
[x] select to include solaris 64=bit support
Select Software
[x] Entire Distribution plus OEM support 64-bit 1914 MB
Select disks
[x] c0t0d0
Preserve data?
F2_Continue
Automatically Layout File Systems?
F4_Manual Layout
F4_Customize
Disk Editing Options
[x] cylinders
Slice Mount Point start-end Size (GB)
0 / 0-5807 8
1 swap 5808-11616 8
2 overlap 0-24619 33.92
3
4
5 /var 11617-17424 8
6
7
F2_Continue
Profile
verify correct
F2_Continue
Reboot After Installation?
[x] auto reboot
F2_Begin Installation
No comments:
Post a Comment